CFP-100G-LR4-XX
100G CFP module offer customers 100 Gigabit Ethernet connectivity options for data center networking, enterprise core aggregation, and service provider transport applications.The module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.100GBASE-LR4 CFP form factor transceiver module for SMF, 4 LAN-WDM lanes in the 1310nm wavelength window, LC duplex connector with up to 10km reach per IEEE 802.3ba requirements.
Key Feature
- CFP MSA package with duplex LC connector(straight/angled)
- Integrated heat sink optional
- 4 LAN-WDM lanes(1295.6nm, 1300.1nm, 1304.6nm, and 1309.1nm) in the 1310nm wavelength window
- Supports 103 Gb/s aggregate data rates,lane bit rate 25.78 Gb/s GbE, 27.95 Gb/s OTU4
- Up to 10km transmission on SMF
- EML laser and PIN receiver
- High speed I/O electrical interface (CAUI)
- MDIO interface with integrated digital diagnostic monitoring
- Single +3.3V power supply
- The maximum power consumption per CFP-100G-LR4 module is 24W
- Operating case temperature: 0°C to +70°C
Applications
- 100GBASE-LR4 Ethernet
- Datacom/Telecom switch & router connections
- Data aggregation and backplane applications
- Proprietary protocol and density application
Notes
xx means compatible brand. (For example: CO= Cisco, JU=Juniper, FD=Foundry, EX=Extreme, NE=Netgear,etc.)
Vì sao nên chọn chúng tôi ?
- Hàng chính hãng bảo hành 1-5 năm.
- Hỗ trợ kỹ thuật Miễn phí.
- Giao hàng nhanh trên Toàn quốc.
- Cho mượn hàng tương đương chạy tạm nếu cần chờ đặt hàng hoặc đổi hàng bảo hành.


