Hội nghị truyền hình Cisco Webex Room Kit Plus CS-KITPLUS-K9

CODE: CS-KITPLUS-K9

Call for Pricing!
Get a Quote

In stock

Add to wish list

Description
Reviews
Tags

Thiết bị hội nghị truyền hình Cisco CS-KITPLUS-K9 thuộc dòng thông minh sử dụng cho các loại phòng họp từ trung bình - lớn.

- Một bộ thiết bị tiêu chuẩn bao gồm: camera, micro, speaker, bộ giải mã sử dụng công nghệ thông minh tự động bắt hình người họp (auto tracking voice, video).

- Thiết bị phần cứng chuyên dụng chuẩn quốc tế ITU-T, giao thức: SIP/ H323.

- Chuẩn nén hình ảnh: H264/H265, full HD 1080p.

- Hỗ trợ 2 luồng Video input/output chuẩn HDMI.

- Tích hợp 4 camera 5K Ultra HD; zoom 5X tự động bắt hình.

- Hỗ trợ mở rộng 3 micro đa hướng, hệ thống âm thanh ngoài.

- Chia sẻ dữ liệu không dây.

- Bộ thiết bị tiêu chuẩn kèm theo: bảng điều khiển cảm ứng 10 inch, nguồn, cáp và phụ kiện đi kèm.

- Phù hợp với phòng họp trung bình: 10-30 người.

Tham số kỹ thuật

Specification	Description
Software compatibility	● Cisco Collaboration Endpoint Software Version 9.0 or later, or Cisco Webex Room OS
Default components in Cisco Webex Room Kit Plus	● Cisco Webex Codec Plus ● Cisco Webex Quad Camera ● Cisco Touch 10 control unit ● Wall mount for Quad Camera
Optional hardware components	● Cisco Table Microphone, Wall mount for Codec Plus, cables
Bandwidth	● Up to 6 Mbps point-to-point
Minimum bandwidth for resolution/frame rate	H.264 ● 720p30 from 768 kbps ● 720p60 from 1152 kbps ● 1080p30 from 1472 kbps ● 1080p60 from 2560 kbps
Firewall traversal	● Cisco Expressway ™ technology ● H.460.18, H.460.19 firewall traversal
Video standards	● H.264, H.265, and H.263 for TANDBERG ™ MXP interoperability only
Video inputs	● One HDMI input supports formats up to maximum 1080p60 ● Two HDMI inputs support formats up to maximum 4K (3840 x 2160) at 30 fps including HD1080p60 ● Extended Display Identification Data (EDID) ● Consumer Electronics Control (CEC) 2.0
Video outputs	● Two HDMI outputs support formats up to 3840 x 2160p60 (4Kp60) ● Consumer Electronics Control (CEC) 2.0
Encode and decode	● Main video: Full HD 1080p60 ● Presentation channel: UHD 4K 2160p5, including 1080p30 and 720p60
Audio standards	● G.711, G.722, G.722.1, G.729, AAC-LD, and Opus
Audio features	● High-quality 20 kHz audio ● Subwoofer line out for Quad Camera ● Prepared for inductive loop (line out) ● Automatic Gain Control (AGC) ● Automatic noise reduction ● Active lip synchronization
Audio inputs	● Three microphones, 4-pin mini-jack ● Embedded audio on two HDMI inputs
Audio outputs	● 1 line out mini-jack (stereo) (Codec Plus) ● 1 RCA output for subwoofer (Quad Camera) ● Embedded audio on one HDMI output ● HDMI input #1 supports Audio Return Channel (ARC): Audio output to Quad Camera
Speakers (Quad Camera)	● High-quality speakers ● Frequency response: 70 Hz to 20 kHz ● Max output level SPL 90dB
Speaker tracking (Quad Camera, SpeakerTrack 60)	● 6-element microphone array for accurate speaker tracking
Dual stream	● H.239 (H.323) dual stream ● Binary Floor Control Protocol (BFCP) (SIP) dual stream ● Support resolutions up to 3840 x 2160p5 (4Kp5),1080p30 and 720p60
Wireless sharing	● Cisco Webex Teams app (up to 3840 x 2160p5) ● Cisco Intelligent Proximity client (up to 1920 x 1080p5)
MultiSite features (embedded multipoint) (optional upgrade)	● Adaptive SIP/H.323 MultiSite ◦ 3-way resolution up to 1080p30 + content up to 4Kp5 ◦ 4-way resolution up to 720p30 + content up to 4Kp5 ● Full individual audio and video transcoding ● H.323/SIP/VoIP in the same conference ● Support for presentation (H.239/BFCP) from any participant at resolutions up to 3840 x 2160p5 ● Best Impression (automatic continuous presence layouts) ● Encryption and dual stream from any site
Protocols	● H.323 ● SIP ● Cisco Webex ● ISDN PRI/BRI using the optional ISDN Link
Embedded encryption	● H.323 and SIP point-to-point ● Standards-based: H.235 v3 and Advanced Encryption Standard (AES) ● Automatic key generation and exchange
IP network features	● DNS lookup for service configuration ● Differentiated services (Quality of Service [QoS]) ● IP-adaptive bandwidth management (including flow control) ● Automatic gatekeeper discovery ● Dynamic playout and lip-sync buffering ● H.245 Dual-Tone Multi-Frequency (DTMF) tones in H.323 ● RFC 4733 DTMF tones in SIP ● Date and time support using Network Time Protocol (NTP) ● Uniform Resource Identifier (URI) dialing ● Dynamic Host Configuration Protocol (DHCP) ● 802.1X network authentication ● 802.1Q Virtual LAN ● 802.1p [QoS and Class of Service (CoS)] ● Cisco Media Assure and ClearPath, including packet loss-based downspeeding
Call control	● Cisco Unified Communications Manager (CUCM) ◦ Native registration CUCM ◦ Requires CUCM Version 10.5.2 or later with device pack Room Kit Plus ● Cisco Expressway ◦ Native registration with Expressway ● Cisco Webex ● Third-party H.323 Gatekeepers and standards-based SIP proxies
IPv6 network support	● Single call stack support for both H.323 and SIP ● Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP, HTTPS, DNS, DiffServ ● Support for both static and automatic IP configuration (stateless address auto configuration)
Security features	● Management using HTTPS and SSH ● IP administration password ● Password to access administration features on Touch 10 controller ● Disable IP services ● Network settings protection
Certificate management	● Certificate Authority Proxy Function (CAPF) support for additional security ● Manufacturer-Installed Certificates (MIC) ● Locally Significant Certificates (LSC) ● X.509 Digital Certificates (DER encoded binary); both DER and Base-64 formats are acceptable for the client and server certificates; certificates with a key size of 1024, 2048, and 4096 are supported
Other interfaces	● USB 2.0 port, uUSB, factory reset pinhole
Network interfaces Codec Plus	● 1 Ethernet (RJ-45) 10/100/1000 for LAN ● 1 Ethernet (RJ-45) 10/100/1000 for direct pairing with camera (camera control) ● 1 Ethernet (RJ-45) 10/100/1000 with PoE, for direct pairing with Touch 10 ● Wi-Fi 802.11a/b/g/n/ac 2.4 GHz and 5 GHz for LAN ● 2x2 multiple input and multiple output (MIMO)
Power supplies (2)	● 100 to 240 VAC, 50/60 Hz, 12V DC input ● Average 20 W, peak 70W ● Quad camera must be used with power supply FSP FSP070-AHAN2 or AcBel ADF019
Operating temperature and humidity	● 0°C to 35°C (32°F to 95°F) ambient temperature ● 10% to 90% Relative Humidity (RH)
Storage and transport temperature	● -20°C to 60°C (-4°F to 140°F) at RH 10% to 90% (noncondensing)
Locking mechanism	● Kensington security lock
Dimensions	● Quad Camera: ◦ Width: 37.4 in. (95.0 cm) ◦ Height: 4.7 in. (12.0 cm) ◦ Depth: 4.0 in. (10.3 cm) ◦ Weight: 10.6 lb. (4.8 kg) ● Codec Plus: ◦ Width: 14.1 in. (35.9 cm) ◦ Height: 1.7 in. (4.3 cm) ◦ Depth: 5.6 in. (14.3 cm) ◦ Weight: 3.9 lb. (1.77 kg)
Camera overview (Quad Camera)	● (4) 5K CMOS sensors with machine intelligent switching; providing single HD output at 1080p ● Support up to 60 fps ● 15.1 MP image sensor ● 1/1.7 CMOS ● 5x digital zoom (3 tele-lenses each with 50° horizontal field of view) ● f/2.0 aperture ● 83° horizontal field of view; 51.5° vertical field of view ● Auto-framing (audio + face detect) ● 5120 x 2880 pixel resolution ● Auto focus, brightness, and white balance ● Focus distance 1 m to infinity