CFP-100G-SR10-xx 100G CFP module supports link lengths of 100 meters and 150 meters respectively on laser-optimized OM3 and OM4 multifiber cables. It primarily enables high-bandwidth 100-gigabit links over ribbon cables terminated with MPO/MTP connectors. It can also be used in 10 x 10 Gigabit Ethernet mode along with ribbon to duplex fiber breakout cables for connectivity to ten 10GBASE-SR optical interfaces. Maximum channel insertion loss allowed is respectively 1.9 dB over 100m of OM3 cable or 1.5 dB over 150m of OM4 cable.
Key Feature
- Compliant to the IEEE 802.3ba(100GBASE-SR10)
- Operates at 10.3125Gbps per channel
- Short wavelength over 10 lanes, 840 to 850nm
- VCSEL array transmitter and PIN array receiver
- Up to 100m on OM3 and 150m on OM4 MMF
- Utilizes a standard MPO/MTP Connector
- Support interoperability with IEEE 802.3ae 10GBASE-SR modules of various form factors such as SFP+, XFP, X2
- Compliant to the CFP MSA Specification
- Single 3.3V Power Supply
- The maximum power consumption per CFP-100G-SR10 module is 12W
- Operating case temperature: 0°C to +70°C
- MDIO digital diagnostic interface and control capabilities
Applications
- 100GBE and 10GBE interconnects
- Datacom/Telecom switch & router connections
- Data aggregation and backplane applications
- Proprietary protocol and density application
Notes
xx means compatible brand. (For example: CO= Cisco, JU=Juniper, FD=Foundry, EX=Extreme, NE=Netgear,etc.)
Vì sao nên chọn chúng tôi ?
- Hàng chính hãng bảo hành 1-5 năm.
- Hỗ trợ kỹ thuật Miễn phí.
- Giao hàng nhanh trên Toàn quốc.
- Cho mượn hàng tương đương chạy tạm nếu cần chờ đặt hàng hoặc đổi hàng bảo hành.